Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

1/2" X 1/8" -Pin Length: 9.2 mm

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Crown Race MX - Size: MX TH 26.4mm

- Rubber - Color: Black

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Chrome - Sold individually

- For MTB levers - 7mm x 1mm - Aluminum construction

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Routes cables underneath the bottom bracket - Will not rust or corrode

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Standard steel replacement

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

Cable exit guide specific to Slash+ for routing hydraulic brake & rear derailleur. Get your cables under control. Product details First used on Slash+ Leave removable tab in place for AXS shifting Hardware not included Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Securely attaches Slash+ speed sensor to the chainstay. Trek proprietary cable management system. Product details Designed for Slash+ Fasten with M4x0.7x6mm button head screw 6.3mm inner diameter clamping area Refer to the Service Manual for assembly & service instructions For OE replacement purposes only - not intended for aftermarket installation

Keep your elbow pads in place. - Necessary for proper assembly - M4 x 10mm

FSA Mega Exo Small Parts.

BB30 Spacer - 15.46mm

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Standard replacement star nuts for threadless steerers.

Compatible with K810 and K810SL Chain

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Replacement cable anchor bolt for brakes - Includes nut and washer

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

Parts for repair and maintenance of DT Swiss hubs.

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

- Sold in pairs - Allen wrench included

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Steel cable noodle with alloy end caps - Includes plastic liner

• Compatible with most side pull and center pull brakes • All weather compound

Keep your investment protected with durable armor designed specifically for your ride. Protection that's engineered to keep your ride looking good as new for years to come. Product details Trek protective armor Model-specific custom fit

Original equipment replacement parts for your ride. - For specific Bosch equipped eBikes only - Mounting hardware sold separately

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Shimano Y8H298040 SM-BH59 Olive and connecting insert

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Travel Adjustment Spacers for the Resolve dropper post. The travel height of the dropper post can be reduced in 5 mm increments up to 50 mm height reduction with 10 spacers.