Lighting

Updated and more secure clothing clip for mounting CatEye safety lights.

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Product details: - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16-degree offset for optimized use on seatposts

- Rack mount bracket only - Fits TL-L225 taillight

SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights

Quick mount headlight bracket - Fits 25.4 – 31.8mm handlebars

Original replacement light bracket for your Farley. Product details Hardware not included Requires two M5x0.8x10mm button head bolts

The Recon TL Rack mount securely attaches your Recon tail light to your rear rack. - Bracket securely attaches Recon TL 200 / 100 to a rear rack - Compatible with Recon TL 200 and Recon TL 100 only

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Quick mount tail light bracket for aero seatposts - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

Quick mount helmet bracket for headlights

Quick mount seatpost tail light bracket - Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light

- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

A unique, innovative clamp system that clips securely and discreetly to your seat rails. Compatible with Recon TL 200 and Recon TL 100 only. Light not included

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

3 LED tail light The Blinky 3 is a classic cycling safety light. The iconic and durable kidney bean design has been keeping bikers visible for two decades. The 3 LEDs are super efficient and last for over 100 hours on flash mode.

Bolt-on fork crown headlight bracket The bolt-on headlight bracket mounts to your fork crown and provides a unique mounting option that centers a headlight just above the front wheel. It comes with a platform that is specifically designed to work with most Planet Bike lights. This platform can be removed quickly to create a 26.2mm diameter universal mount that accommodates most clamp and stretch strap mounting systems. - Planet Bike specific platform works with most Planet Bike headlights - Converts to a 26.2mm universal mount to fit most headlight mounting systems - Bracket bolts through brake mount on fork crown (60mm bolt, washer, and nut included) - Compatible with all Blaze, Beamer, Spok, Amigo and Spot headlights - Weight: 72 grams

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.